At Outfit Paintball we have a full tech and repair center on the premises. If you can break it, chances are we can fix it. Most problems with paintball equipment is repairable on-site and usually takes 3-5 business days or less to complete. We also offer tune-up services and maintenance checks to keep your marker and gear running at its peak performance.
In addition to the tech center, we are also a drop-off location for Tank Hydrotesting recertification. We also offer CO2 and HPA re-fills for your tanks.
Below you will find a list of our offered services and costs. Be advised that prices may vary.
CO2 / HPA Air Fills (does not include tax)

Standard Paintball Fills
- CO2: 3.5oz - 7oz -- $3.00
- CO2: 9oz - 12oz -- $4.00
- CO2: 16oz - 24oz -- $5.00
- HPA: 3000psi Fill -- $3.00 ($1 per 1000psi)
Bulk CO2 Fills
- CO2: 5lb Bulk Tank -- $25.00
- CO2: 10lb Bulk Tank -- $35.00
- CO2: 20lb Bulk Tank -- $45.00
Marker Service -- $30.00

- Takes care of most minor leaks and performance problems with any marker and gets most basic markers back into working order.
- Fresh oil/grease on parts and o-rings.
- Reg pressures checked and set if applicable.
- Includes cleaning and chronograph check of marker.
- 30 day warranty on all repairs for PROBLEMS RELATING TO THE ORIGINAL SERVICE COMPLETED!
- DOES NOT INCLUDE COST OF PARTS!
- Standard turnaround is 3 - 5 days unless parts need to be ordered.
Marker Service Plus -- $45.00

- This service covers more substantial repairs such as complete marker rebuilds, solenoid rebuilds, electronics maintenance and programming, drilling, tapping, soldering, and any other problems.
- Includes all the basic services including cleaning, re-lubing, and chronograph. Gets the marker back to proper working order.
- 30 day warranty on all repairs for PROBLEMS RELATING TO THE ORIGINAL SERVICE COMPLETED!
- DOES NOT INCLUDE COST OF PARTS!
- Standard turnaround is 4 - 6 days unless parts need to be ordered.
Tank Hydrotesting -- $31.25

- Hydrotesting service for all CO2 and HPA tanks.
- Turnaround usually takes 2 - 4 weeks for completion from drop off date.
Tank Service -- $10.00

- Service for High Pressure Regulator systems.
- Includes rebuilding HPA tank regulators and repairing any leaks.
- Fresh grease, cleaning, re-assembly, and loc-tite if desired.
- DOES NOT INCLUDE COST OF PARTS!
Hopper Service -- $10.00

- Repair problems with electronic and force-fed hopper systems.
- Cleaning and performance check included.
- DOES NOT INCLUDE COST OF PARTS!
Minor Machine and Electronics Work -- $10.00+ per job

- Drilling/Tapping - Drilling out stripped screws, drilling new holes for modifications, tapping new holes, chasing threads to clean debris, repairing stripped screw holes if possible.
- Soldering - Soldering ripped wires back together, minor circuit board work, repairing/replacing faulty electronic components.